| Items | Minimum | Standard | Maximum | Remark |
| Battery Parameters | --- | 45AH | --- | LiFePO4 7 series and 3 parallel 15000mAh each |
| Rated voltage | --- | 22.4V | --- | 7 series |
| Capacity | --- | 1008WH | --- | Depending on the capacity of a single battery cell |
| Control Mode | --- | --- | --- | Charging and discharging negative electrode control at the same port |
| Short Circuit Protection | --- | Supported | --- | When there is a short circuit at the protection board end, the output will be turned off and it needs to be activated by charging |
| Overcharge Protection Voltage | 3.62V | 3.65V | 3.68V | Single series |
| Overcharge Protection Delay Time | 0.8S | 1S | 1.2S | |
| Overcharge Recovery Voltage | 3.52V | 3.55V | 3.58V | Single series |
| Over Discharge Protection Voltage | 2.27V | 2.30V | 2.33V | Single series |
| Delay time of over discharge protection | 0.5S | 1S | 1.5S | |
| Over Discharge Recovery Voltage | 2.47V | 2.5V | 2.53V | Single series |
| Charging overcurrent protection current | 54A | 60A | 66A | |
| Charging overcurrent delay | 1.4S | 2S | 2.6S | |
| protection current for Discharge Overcurrent | 80A | 82A | 83A | |
| delay of Discharge overcurrent | 0.5S | 1S | 1.5S | |
| Short circuit protection current | / | V | / | |
| Short Circuit Delay Time | / | / | / | |
| Equalizing opening voltage | 3.50V | 3.525V | 3.55V | |
| Equalization start delay | 2mS | 5mS | 40mS | |
| Low Voltage Charging Prohibited | 1.4V | 1.5V | 1.6V | Single series |
| High temperature protection during charging | 53℃ | 56℃ | 59℃ | The BMS detects a temperature above which the battery stops working |
| Low temperature protection during charging | -2℃ | -0℃ | +2℃ | Stop charging when the battery temperature is too low. Charging at low temperatures will reduce battery capacity and lifespan |
| High temperature protection during discharge | 53℃ | 55℃ | 57℃ | BMS detects temperature, above which the battery stops discharging |
| Low temperature protection during discharge | -22℃ | -20℃ | -18℃ | BMS detects temperature, the temperature is too low, and the battery stops discharging |
| BMS static power consumption | --- | ≤200uA | --- | The product is in a dormant state, and BMS power consumption |
